CARA INSTALLASI DAN CONFIGURASI FE SERVER

Hallo Post pertama sesuai Judul yang sempat di bahas di chanel youtube official kami sebelumnya

cara settingnya sebagai berikut :

 

    1. Caranya  download script FE-server (link menyusul No There, No Anywhere) terus upload ke VPS .
    2. Eksekusi script FE-Server installasinya
      tahap pertama

    3. Cara setting configgurasi Fe-Server
      berikut keteranganya;

      BASIC #####
      # Listen http & https(ssl/tls) port, set to 0 for disable
      listen_http_port=80
      listen_https_port=443
      # Allowed Destination port of SSH Dropbear/OpenSSH port in this server.
      # Use “;” for separate many ports are permited.
      # Example: 22;104;etc
      destination_ports=22
      # Maximum user session.
      # Set max the active user session,
      # max permitted user session handled by server.
      session_max=1000# User session timeout
      # kill no longer session process activity.
      # for user session for safe your memory (by Minutes).
      session_timeout=3
      # Custom HTTP Response Headers
      # If client need Http Headers to reply.
      # Place Holders :
      # [length] (content length), [crlf], [lfcr], [cr], [lf], [sid] (session id)
      # Don’t use Enter Keyboard,
      # Use “cr” or/with “lf” place holder for newline
      # Don’t make error this config right ? :p# Response OK
      send_http_ok=HTTP/1.1 200 OK[crlf]X-Session-Id: [sid][crlf]Content-Type: application/octet-stream[crlf]Connection: keep-alive[crlf]Content-Length: [length][crlf][crlf]# Response Error
      send_http_error=HTTP/1.1 500 Internal Server Error[crlf]X-Session-Id: [sid][crlf]Content-Type: octet-stream[crlf]Connection: close[crlf]Content-Length: [length][crlf][crlf]

      ##### PERFORMANCE TUNNING #####
      # Maximum number of thread core for execute many request at same time.
      # Keep in mine, don’t attack your server right ? 😀
      thread_cores=50

      # Maximum number of waiting request to handled by thread core.
      # If over than maximum value, request will be rejected.
      dispatch_max=1000

      # Maximum creating buffer for Dispatcher (as Byte).
      # Set up for more User Speed Experience or set down for minimum server memory specification.
      # Always keep in mine don’t blow your server right ? 😀
      # 65550 in default:
      # -> 14 for Header,
      # -> 65536 for packet message.
      allocated_buffer=65550

      ##### DEVELOPER SIDE ######
      # Enable process logger for tester.
      # “1” enable , “0” disable.
      # If used normaly don’t activate this, many memory can be used. 🙂
      enable_logger=0

      Bila dirasa sudah cukup silahkan save configgurasi tersebut..

    4. Silahkan jalankan perintah untuk menjalankan Fe-Server di VPS dengan mengEksekusi
      -> systemctl start feserver.service (Enter)

      Untuk melihat bahwa server Fe-Server telah berjalan ketikan perintah
      -> systemctl status feserver.service -l (Enter)
      Jika sukses di jalankan maka akan tampil kurang lebih seperti gambar di bawah ini
    5. Dan setelah installasi Fe-Server selesai Baru dapat di gunakan
      untuk tutorial dapat di lihat di Channel kami

ikuti kami juga di
Fanspage Official
Grub Official FE-Tunnel

Post Author: dmondjul